Call us : +919895284319   |   E-Mail : sales@ipcsautomation.com
ipcs facebook ipcs twitter ipcs linkedin ipcs google plus ipcs youtube ipcs rss feed ipcs blog

PRODUCTS SOLUTIONS Product Enquiry

Type 2 Surge Arresters |  Type 1 Combined Lightning Current and Surge Arresters |  Coordinated Type 1 Lightning Current Arresters |  Type 1 Lightning Current Arresters |  Accessory for Type 1 Arresters |  N-PE Lightning Current Arresters |  Type 3 Surge Arresters |  International |  General accessories |  Voltage Controlled Short-Circuiting Device |  Isolating spark gaps |  Measuring and test equipment |  SDS |  Medium-voltage arrester

Type 2 Surge Arresters Suppliers

Type 2 DEHNguard S / M ...CI / SCI surge arresters are available in different types and voltages and are ideally suited for a.c., d.c. and PV applications.

DEHNguard® modular with integrated Backup Fuse

DEHNguard® modular with integrated Backup FuseModular multipole surge arrester with integrated backup fuse with a functional design. For protecting low-voltage consumer´s installations against surges. For installation in conformity with the lightning protection zone concept at the boundaries from 0B – 1 and higher. Type 2 SPD according to EN 61643-11 Arrester backup fuse integrated in the protection module Prewired complete unit consisting of a base part and plug-in protection modules Energy coordination with other arresters of the Red/Line product family High discharge capacity High reliability due to "Thermo Dynamic Control" SPD monitoring device Easy replacement of protection modules without tools due to module release button

DEHNguard® modular

DEHNguard® modularModular multipole surge arrester with a functional design. For protecting low-voltage consumer´s installations against surges. For installation in conformity with the lightning protection zone concept at the boundaries from 0B – 1 and higher. Type 2 SPD according to EN 61643-11 Prewired complete unit, consisting of a base part and plug-in protection modules Energy coordination with other arresters of the Red/Line product family High discharge capacity due to heavy-duty zinc oxide varistors / spark gaps High reliability due to "Thermo Dynamic Control" SPD monitoring device Easy replacement of protection modules due to module release button Vibration and shock-tested according to EN 60068-2

DEHNguard® S

DEHNguard® SModular single-pole surge arrester with a functional design. For protecting low-voltage consumer´s installations against surges. For installation in conformity with the lightning protection zone concept at the boundaries from 0B – 1 and higher. Type 2 SPD according to EN 61643-11 Multi-purpose surge arrester consisting of a base element and plug-in protection module High discharge capacity due to heavy-duty zinc oxide varistor High reliability due to "Thermo Dynamic Control" SPD monitoring device Energy coordination with other arresters of the Red/Line product family Operating state / fault indication by green / red indicator flag in window Narrow (modular) design according to DIN 43880 Multifunctional terminals for connecting conductors and busbars Easy replacement of protection modules due to module release button FM version available with three-pole terminal set for connecting the remote indication

DEHNguard® S ... VA

DEHNguard® S ... VAModular single-pole surge arrester For protecting low-voltage consumer´s installations against surges. For installation in conformity with the lightning protection zone concept at the boundaries from 0B – 1 and higher. Type 2 SPD according to EN 61643-11 All-purpose surge arrester consisting of a base part and plug-in protection module Heavy-duty zinc oxide varistor, ”Thermo Dynamic Control” monitoring device connected in series with a spark gap Energy coordination with other arresters of the Red/Line product family Narrow (modular) design in accordance with DIN 43880 Multifunctional terminal for connecting conductors and busbars Easy replacement of protection modules due to module release button FM version available with three-pole terminal set for connecting the remote indication

DEHNguard® SE H LI ... FM

DEHNguard® SE H LI ... FMSingle-pole surge arrester with integrated “Lifetime Indication“ early warning system. For protecting low-voltage consumer’s installations against surges. For installation in conformity with the lightning protection zone concept at the boundaries from 0B to 1 and higher. Type 2 SPD according to EN 61643-11. Universal surge arrester comprising a base part and a plug-in protection module Clear three-step “Lifetime Indication“ (green-yellow-red) linked with remote signalling contact Prompts the user in time to replace the protection module in case of imminent arrester overload --> early warning system The arrester is fully operational until the protection module is replaced and is thus suited for use in condition monitoring systems High discharge capacity Imax up to 65 kA (8/20 μs) New design (width of 1.5 modules) for voltages from 275 V to 1000 V a.c. Energy coordination with other arresters of the Red/Line product family

DEHNcord

DEHNcordTwo-pole or single-pole surge arrester with a compact design. For protecting low-voltage consumer's installations against surges. For use according to the lightning protection zone concept at the boundaries from 0B – 1 and higher. Type 2 SPD according to EN 61643-11 Surge arrester for universal and flexible use Energy coordination with other arresters of the Red/Line product family Operating state / fault indication by green / red indicator flag in the inspection window For use in flush-type boxes, flush-mounted systems and cable ducts Compact design allows to protect electrical and electronic loads in final circuits DCOR L ... 275 type specifically suited for safety lighting systems (d.c. + a.c. operation)

DEHNguard® SE DC ... (FM)

DEHNguard® SE DC ... (FM)Modular single-pole surge arrester for protecting d.c. consumer's installations. For protecting low-voltage consumer's installations from surges. For installation in conformity with the lightning protection zone concept at the boundaries from 0B – 1 and higher. Type 2 SPD classification according to EN 61643-11. Universal single-pole surge arrester consisting of a base part and plug-in protection module Design specifically developed for use in d.c. circuits Powerful d.c. switching device DCD Operating state / fault indication by green / red indicator flag in the inspection window Easy replacement of protection modules due to module release button Use without additional backup fuse in defined applications DG SE DC 242 (FM) ideally suited for safety lighting systems (d.c. + a.c. operation) New design (width of 1.5 modules) for voltages from 60 V to 900 V d.c. Energy-coordinated with other arresters of the Red/Line product family

DEHNgap C S

DEHNgap C SN-PE surge arrester with a functional design. For protecting low-voltage consumer´s installations against surges. For installation in conformity with the lightning protection zone concept at the boundaries from 0B – 1 and higher. Type 2 SPD according to EN 61643-11 Specifically designed for use in "3+1" and "1+1" circuits of TT systems acc. to IEC 60364-5-53 between neutral conductor N and protective conductor PE High discharge capacity Two-part surge arrester consisting of a base part and plug-in spark-gap-based protection module Energy coordination with other arresters of the Red/Line product family Easy replacement of protection modules without tools due to module release button Operating state / fault indication by green / red indicator flag in the inspection window FM version available with three-pole terminal set for connecting the remote indication

DEHNguard® modular E (Y)PV SCI 1500

DEHNguard® modular E (Y)PV SCI 1500Modular multipole surge arrester with three-step d.c. switching device for PV systems up to 1500 V. For installation in conformity with the lightning protection zone concept at the boundaries from 0B – 1 and higher. Type 2 according to EN 61643-11 Prewired modular complete unit for use in photovoltaic systems up to 1500 V consisting of a base part and plug-in protection modules Combined disconnection and short-circuiting device with safe electrical isolation in the protection module prevents fire damage due to d.c. switching arcs (patented SCI principle) Approved fault-resistant Y circuit prevents damage to the surge protective devices in case of insulation faults in the generator circuit Integrated d.c. fuse allows safe replacement of protection modules without arc formation New design for safe use in PV systems up to 1500 V (width of 1.5 modules) Suitable for use in all PV systems in accordance with IEC 60364-7-712 Short-circuit withstand capability ISCPV: 1000 A

DEHNguard® modular (Y)PV SCI ...

DEHNguard® modular (Y)PV SCI ...Modular multipole surge arrester with three-step d.c. switching device for use in PV systems up to 1200 V. For installation in conformity with the lightning protection zone concept at the boundaries from 0B – 1 and higher. Type 2 SPD according to EN 50539-11 Prewired and modular complete unit for use in photovoltaic systems consisting of a base part and plug-in protection modules Combined disconnection and short-circuiting device with safe electrical isolation in the protection module prevents fire damage caused by d.c. arcs Tried and tested fault-resistant Y circuit prevents damage to surge protective devices in case of insulation faults in the generator circuit Integrated d.c. fuse allows safe replacement of protection modules without arc formation Versions up to PV voltages of 150 V, 600 V, 1000 V and 1200 V Suitable for use in all PV systems according to IEC 60364-7-712 Short-circuit current rating ISCPV: 1000 A

DEHNcube

DEHNcubeMultipole surge arrester with three-step d.c. switching device for use in PV systems up to 1000 V with IP 65 degree of protection. For installation in conformity with the lightning protection zone concept at the boundaries from 0B – 1 and higher. Type 2 SPD according to EN 50539-11 Prewired complete unit for use in photovoltaic systems Combined disconnection and short-circuiting device with safe electrical isolation in every protective path prevents fire damage caused by d.c. switching arcs (patented SCI principle) Approved fault-resistant Y circuit prevents damage to surge protective devices in case of insulation faults in the generator circuit No space required in a distribution board enclosure Spring-loaded terminals for connection without tools Suitable for use in all PV systems according to IEC 60364-7-712 Short-circuit current rating ISCPV: 1000 A

DEHNguard® YPV SCI – compact

DEHNguard® YPV SCI – compactMultipole surge arrester with three-step d.c. switching device for use in PV systems up to 1000 V. For installation in conformity with the lightning protection zone concept at the boundaries from 0B – 1 and higher. Type 2 SPD according to EN 50539-11 Prewired complete unit for use in photovoltaic systems Combined disconnection and short-circuiting device with safe electrical isolation prevents fire damage due to d.c. arcs Tried and tested fault-resistant Y circuit prevents damage to surge protective devices in case of insulation faults in the generator circuit Versions for maximum PV voltages of 600 V and 1000 V Tested to EN 50539-11 Suitable for use in all PV systems according to IEC 60364-7-712 Short-circuit current rating ISCPV: 200 A

DEHNguard® PCB

DEHNguard® PCBSingle-pole base for DEHNguard protection modules for easily integrating a type 2 arrester directly on the PCBs of devices to provide surge protection. For installation in conformity with the lightning protection zone concept at the boundaries from 0B – 1 and higher. Base for DEHNguard protection modules mounted on and integrated in PCBs Optimal integration of a type 2 arrester in devices Easy and flexible use for all circuit configurations Proven DEHNguard modules ensure high performance Coded base part and protection module ensure against installing an incorrect module Version with and without remote signalling contact for the monitoring device

AL DCU X / AL DCU Y

AL DCU X / AL DCU Yreassambled connecting cables for easy and quick connection of DEHNcube DCU YPV SCI 1000 … surge arresters to the equipment of the photovoltaic generator that they are supposed to protect Double insulated 6mm² PV connecting cable Stripped cable ends for quick attachment of the PV plug connector and connection to DEHNcube (without tools by means of spring-loaded terminal) Cable length of 1000 mm for inverter inputs which are difficult ot access Cable length of 600 mm for easily accessible inverter inputs AL DCU Y for one string per MPP input AL DCU X for two strings per MPP input IP65 degree of protection for protection against environmental influences

DEHNguard® 1000

DEHNguard® 1000Compact single-pole surge arrester. For protecting low-voltage consumer´s installations against surges. For installation in conformity with the lightning protection zone concept at the boundaries from 0B – 1 and higher. German utility patent. Type 2 SPD according to EN 61643-11 High discharge capacity due to heavy-duty zinc oxide varistor Quick response High reliability due to "Thermo Dynamic Control" disconnector Fault indication by green / red indicator flag in the inspection window FM version available with three-pole terminal set for connecting the remote indication

V NH / VA NH

V NH / VA NHNH surge arresters with integrated arrester backup fuse For protecting low-voltage consumer´s installations against surges. For installation in conformity with the lightning protection zone concept at the boundaries from 0B – 1 and higher. German patented design. SPD Type 2 according to EN 61643-11 Surge arrester for use in size 00 and 1 NH fuse holders Zinc oxide varistor with monitoring device, disconnector and integrated backup fuse (VA NH... with additional spark gap connected in series) Energy coordination with other arresters of the Red/Line product family Fault indication by tripping indictor

SPD+POP+MCB / POP+MCB

SPD+POP+MCB / POP+MCBCompact surge arrester for transients and mains-frequency surges with integrated circuit breaker for installation In conformity with the lightning protection zone concept at the boundaries from 0B – 1 and higher Type 2 SPD according to EN 61643-11 Comprehensive protection against transients and mains-frequency surges (SPD+POP 2/4 255 C..) Fulfils the requirements of EN 50550 "Power frequency overvoltage protective device" Prewired complete unit, individual devices do not have to be additionally wired Easy installation and retrofitting thanks to low space requirements High reliability due to "Thermo Dynamic Control" monitoring system integrated in the SPD Application-optimised discharge capacity of5 kA (In) / 15 kA (Imax) (8/20 µs) per pole Energy coordination with other arresters of the Red/Line series Operating state / fault indication by green / red indicator flag in the inspection window of the SPD

Our Brands
  • Siemens
  • ABB
  • Movicon
  • Omron
  • Wonderware
  • Yaskawa
  • Allen Bradley
  • GE Fanuc
  • Dehn
  • I fix
  • Schneider Electric
  • Yokogava
  • Honey Well
Shenoy's Junction, MG Road
Ernakulam, Kerala, India
0484 404 6664,
sales@ipcsautomation.com

Ram Nagar, Gandhipuram
Coimbatore, TN, India
04224223664, 9585526664
sales@ipcsautomation.com

Railway Link Road,
Calicut, Kerala, India
0495 - 401 6664, 3236034,
sales@ipcsautomation.com

Sector 15, Vashi,
Navi Mumbai, India
+91 9539 09 6664
sales@ipcsautomation.com
Villa No. 30, Wadi Al Raha Street,
Nuaija (43), Doha - Qatar
00974 66526664, 30012909
sales@ipcsautomation.com

© IPCS Automation. All rights reserved. Web Designing Company Zentrix Technologies